Dorel Juvenile Group Alpha Omega User Manual

C. Basic Use C-3 Securing Child in Child RestraintPosition Harness Straps Over the Child’s Shoulders. 1. Buckle Harness Push each buckle tongue into b

C. Basic Use C-4 Removing Child From Child Restraint C-5 Accessoriescontinued on next page.Loosen Harness Press on harness release lever while pulling

22 C-6 Reclining Child RestraintThis child restraint has 3 recline positions:Rear-facing - Recline restraint so that the level lines on shoulder belt-

23C. Basic Use245. 6. 7. Insert Metal Retainer Through Shell and PadLocate buckle’s metal retainer under the shell.Rotate metal retainer, then insert

C. Basic Use25Harness straps MUST be threaded over the metal bar.Harness system must be reattached correctly.Buckle’s metal retainer must be completel

C. Basic Use C-9 Removing Seat Pad for CleaningYou must remove the harness system to remove the pad.Remove the Elastic Straps Release the elastic stra

3029Your vehicle’s features may be considerably different than those pictured here. Consult your vehicle owner’s manual to help identify your vehicle’

Vehicle Belts If LATCH is not an option, you must use the vehicle seat belt system to install the child restraint. There are some vehicle belts that w

Place Child Restraint in Vehicle Rear-Facing With child restraint in the most reclined position, place child restraint in the back seat.Check for prop

35D. General Vehicle Installation36Thread Vehicle Belt Thread the vehicle lap/shoulder belt combination through the rear-facing belt slot.2. 12Pull Ve

E-1 Preparing to Install Rear-FacingE-2 Preparing to Install LATCH Rear-FacingE-3 Install Rear-Facing with LATCHE-4 Install Rear-Facing with Vehic

E. Installing Rear-Facing37This restraint is certified for aircraft use only when used with the internal harness. This child restraint is NOT certifie

Fully Recline and Place Child Restraint in the Back Seat Rear-Facing For children between 5-22 lbs (2.3-10 kg), the bottom level to ground line MUST

For children 22-35 lbs (10.1-16 kg) and can sit up unassisted, rotate the child restraint between the 2 level to ground lines. Start by making the bot

43E. Installing Rear-Facing E-4 Install Rear-Facing with Vehicle BeltsStore Top Anchorage Hook (Tether) Attach the top anchorage hook (tethe

4546E. Installing Rear-FacingIt maybe easier to tighten the belt through the belt path opening as shown. With a switchable retractor, pull the shoulde

4748 F-1 Preparing to Install Forward-FacingLap BeltLATCH BeltLap/Shoulder Belt22-50 lbs (10.1-22.6 kg) and 34-45 in. (85.1-114.3 cm) and at least 1 Y

4950 F-3 Preparing to Install LATCH Forward-FacingRouting LATCH Belt Insert the hook that has the adjuster closest to it, through the forwar

51F. Installing Forward-FacingTighten Top Anchorage Strap Push firmly on the back of the seat and tighten top anchorage strap.4. Check Belt Tightness

5354F. Installing Forward-FacingThread Vehicle Belt Thread the vehicle lap or lap/shoulder belt combination through the forward-facing belt slot and

5556Store Latch Belts Fasten the LATCH belt hooks together behind seat. G-1 Preparing Belt-Positioning Booster40-100 lbs (18.1-45.4 kg) and 43-52 in

Thank you for choosing this car seat, referred to throughout this manual as a child restraint. The DJG family is committed to creating a child restrai

5758Place Child Restraint Forward-Facing in Vehicle Place child restraint in the back seat, flush against the back of the vehicle seat.1. G-2 Install

59601. If the child restraint buckle or harness release lever sticks or you cannot get the straps tight enough around child: DO NOT LUBRICATE. Check

6261Replacement Parts ListNOTE: If requested color is not available, similar color will be substituted. Prices are subject to change.Part

PUSH5A. Headrest/Harness Height Adjustment LeversB. Adjustable HeadrestC. Infant Insert (on select models) D. Cup Holder (on select models)E

Back ViewA. Top Anchorage (Tether) Strap B. Locking Clip (behind harness) C. Splitter Plate D. Instructions (in bottom of base)E. T

910 B-3 Child Restraint UseNever take your child out of the child restraint while the vehicle is moving. Never leave child unattended.Placing your chi

C-1 Choose Position for Your ChildYour child’s height, weight and age determine how your child restraint should be placed in the vehicle. 5-35 lbs (2

C. Basic UseCheck Buckle Position Determine which of the available buckle positions will be comfortable and provide a snug fit for your child.5. 1314L

To Adjust Harness/Headrest Height Loosen harness straps. Rotate headrest/harness height adjustment levers inward. Move headrest to the proper height